Pipe Fittings and Flanges Suppliers in Singapore - PSC Pipe Fittings and Flanges Suppliers in Singapore. Singapore, a major hub for global trade and infrastructure, has a strong demand.

Pipe Fittings and Flanges Suppliers in Singapore – PSC

/ Fittings and Flanges, Industrial Flanges, SS Flanges / By

Pipe Fittings and Flanges Suppliers in Singapore

Pipe Fittings and Flanges Suppliers in Singapore Singapore, a major hub for global trade and infrastructure, has a strong demand for high-quality pipe fittings and flanges. These components are essential in industries such as oil and gas, petrochemicals, shipbuilding, construction, and power generation. At Prime Steel Corporation, we supply a comprehensive range of pipe fittings and flanges, ensuring durability, precision, and adherence to international standards. Our products are highly demanded in key industrial areas such as Jurong Industrial Estate, Tuas, Changi, Sungei Kadut, and Pioneer.

Comprehensive Range of Pipe Fittings and Flanges

Buttweld Elbows (45, 90, 180 Degree):

Buttweld elbows are essential in piping systems to redirect the flow of liquids and gases. These elbows are available in different angles, each serving a unique purpose. 45-degree elbows are used for a subtle change in flow direction, commonly found in water and oil pipelines. 90-degree elbows provide a sharp turn, making them ideal for tight spaces in industrial setups. 180-degree elbows allow for a full reversal of flow, typically used in heat exchangers and process piping.

  1. Sizes: 1/2” NB to 48” NB.
  2. Thickness: Sch 10 to Sch XXS.
  3. Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.
  4. Standard: ANSI/ASME B16.9.

Buttweld Stub Ends (Short, Long, Lap Joint):

Stub ends are a crucial alternative to welding, allowing pipes to be joined using lap joint flanges. Short stub ends are suitable for low-pressure applications, while long stub ends are preferred in high-pressure and high-temperature systems. Lap joint stub ends offer flexibility, enabling easy alignment and dismantling for maintenance.

  1. Size Range: 1/2” NB to 24” NB.
  2. Material Standards: ASTM A403 (Stainless Steel), ASTM A234 (Carbon Steel), ASTM A182 (Alloy Steel).

Pipe Bends (1D, 1.5D, 3D, 5D, 8D, 10D, Hot Induction Bends, Piggable Bends, Mitered Bend, U Bend, J Bend):

Pipe bends are used to create smooth directional changes in piping systems, reducing turbulence and pressure drop. These bends are classified based on their curvature. 1D, 1.5D, 3D, 5D, 8D, and 10D bends provide varying degrees of smooth flow. Hot induction bends are manufactured through a controlled heating process for high-temperature applications. Piggable bends allow pipeline cleaning and maintenance. Mitered bends are fabricated by welding multiple sections at specific angles, while U and J bends are commonly used in heat exchangers.

  1. Size Range: 1/2” NB to 48” NB.
  2. Material: Stainless Steel, Carbon Steel, Alloy Steel, Super Duplex.

Forged Fitting Union, Bushing, and Plug:

Forged fittings provide high strength and durability, making them ideal for high-pressure and high-temperature conditions. Unions allow easy disassembly of pipelines, commonly used in plumbing and industrial applications. Bushings help connect pipes of varying diameters, optimizing space in compact systems. Plugs are used to seal pipeline ends, available in hex, round, and square designs.

  1. Pressure Ratings: 2000, 3000, 6000, 9000 PSI.
  2. Size Range: 1/8” to 4” NB.
  3. Standard: ASME B16.11.

Slip-On Flange:

Slip-on flanges are cost-effective and easy to install, making them suitable for low-pressure pipelines. These flanges are commonly used in water treatment plants, chemical industries, and structural applications.

  1. Sizes: 1/2” to 60” NB.
  2. Material Grades: ASTM A105, A182, A350.
  3. Class Ratings: 150#, 300#, 600#, 900#, 1500#, 2500#.

Weld Neck Flange:

Weld neck flanges are ideal for high-pressure applications, as their long tapered hub provides reinforcement at the weld joint. These flanges are widely used in oil refineries, power plants, and chemical industries.

  1. Bore Sizes: Standard and custom bore sizes available.
  2. Pressure Ratings: Up to Class 2500.
  3. Material: Stainless Steel, Carbon Steel, Alloy Steel.

Spectacle Blind Flange:

Spectacle blind flanges are designed to isolate pipeline sections for maintenance and inspection. They consist of a blind and an open ring, which can be rotated to control flow.

  1. Types: Full blank and open ring.
  2. Thickness: 3mm to 50mm.
  3. Materials: ASTM A516 Gr. 70, Stainless Steel 304/316, Duplex.

Nipoflange:

Nipoflanges are a combination of a nipolet and a flange, allowing efficient branching of pipelines. They are widely used in high-pressure steam, oil, and gas applications.

  1. Sizes: 1/2” NB to 24” NB.
  2. Pressure Ratings: 150# to 2500#.
  3. Material: Carbon Steel, Stainless Steel, Alloy Steel.

Weldoflange:

Weldoflanges merge a weld neck flange with a welding outlet, offering enhanced strength and reliability in demanding industrial environments.

  1. Size Range: 1/2” NB to 24” NB.
  2. Application: High-pressure and critical service environments.
  3. Material Standards: ASTM A105, ASTM A182, ASTM A350.

Why Choose Prime Steel Corporation?

At Prime Steel Corporation, we specialize in manufacturing and supplying high-quality pipe fittings and flanges that meet ASME, ANSI, ASTM, API, and DIN standards. Our commitment to excellence ensures that we provide customized solutions to meet specific project needs. With a strong presence in Singapore’s top industrial hubs, we guarantee competitive pricing, high durability, and on-time delivery for all our products.

For inquiries and orders, contact us at sales@primesteelcorp.com.

Follow us on twitter